Professional single fiber multi-service BIDI 12G SDI Fiber Optic--FD2917B

HDMI SDI DVI 高清切换台

Professional single fiber multi-service BIDI 12G SDI Fiber Optic FD2917B,Optical signal transmission system designed based on broadcast-grade 12G SDI signals. The input SDI signal is adaptive, the output is synchronized with the input and supports the Relock function. The equipment has built-in SDI signal equalization, SDI serial clock recovery and line driver, and the signal quality complies with broadcast and television standards. It can transmit signals such as gigabit network, RS232, RS422/RS485, GPIO, and audio while transmitting 12G  SDI. The equipment adopts a single-mode single-fiber design with a standard transmission distance of 20KM. The corresponding modules of different distances can be replaced at will according to different application scenarios. It can be widely used in professional SDI video signals such as UHDTV/FHDTV/HDTV/SDTV, especially suitable for various engineering project applications of fiber optic mixed signal transmission.


 

◆ Single fiber optical signal (FC interface)
◆ 1-CH 12G SDI signal input
◆ 2-CH 12G SDI signal outputs
◆ 1-CH 12G SDI signal loop out
◆ 1 set of RS422/bidirectional RS485
◆ 1 set of RS232 (bidirectional)
◆ Support for Type C control/upgrade
◆ Dual Port Gigabit Network (ETH 1000M)
◆ Network port supports switch function
◆ Adaptive input format
◆ Output signal automatic ReClock
◇ Optional bidirectional GPIO/Tally transmission
◇ Optional bidirectional audio transmission
◇ Special functions can be customized
◆ RS232/RS422/RS485 baud rate adaptation
◆ SDI supports 12G/6G/3G/1.485G/270M

Professional Single Fiber 8K/48G SDI Optical Transceiver--FD2417

HDMI SDI DVI 高清切换台

Professional Single Fiber 8K/48G SDI Optical Transceiver.Optical signal transmission system designed based on broadcast-grade 8KSDI signals. clear picture quality Clear and highlighted 3D texture. Video lossless transmission, no compression, no delay, no video lag. The device supports up to Quad Link 48G SDI signals and is downward compatible with 12G SDI, 6G SDI, 3G SDI, 1.5G SDI and 270M SDI signals.The transmitter supports 4x12G SDI signal input, and 4x12G SDI loop out, which is converted into one optical fiber output after passing through the multiplexer. The receiving end supports 1 optical signal input, and outputs 2 groups of QuadLink 12G SDI outputs after demultiplexing.
The equipment adopts a single-mode single-fiber design with a standard transmission distance of 20KM. The corresponding modules of different distances can be replaced at will according to different application scenarios. Applications using QuadLink 8K SDI signals or 4-channel 12G SDI.
The input SDI signal is adaptive, the output is synchronized with the input and supports the ReClock function. The equipment has built-in SDI signal equalization, SDI serial clock recovery and line driver, and the signal quality complies with broadcast and television standards.
 


 

Receiver:
◆ 1 optical signal input
◆ Single fiber optical signal (FC interface)
◆ Total output bandwidth 48G x 2
◆ 2 groups of quad-link 12G SDI signal output

 

Transmitter:
◆ Quad-link 12G SDI signal input
◆ Quad-link 12G SDI signal loop out
◆ 1 optical fiber signal output
◆ Single fiber optical signal (FC interface)
◆The total bandwidth of the equipment is 48G
◆ Built-in clock recovery function
◆ Automatic ReClock of loop-out signal
◆ Single channel supports up to 12G SDI,backward compatible
◆ Input 12G/6G/3G/1.485G/270M adaptive

    

4-CH DP/DVI/XVI to Fiber Optic

HDMI SDI DVI 高清切换台

Professional-grade centralized DP/DVI/XVI  optical transceiver, an optical signal transmission system based on broadcast-grade DP/DVI/XVI  signal design. Integrated up/down conversion function, DP/DVI/XVI  input signal adaptive, output optional 1080P60/30, etc. In addition, the device can also support 8-CH independent audio transmission. The device has built-in signal equalization, serial clock recovery and line driver. The devices are used in pairs, and the input and output of optical fiber and DP/DVI/XVI  can be customized by manipulating the DIP switch. The receiving end supports 1 optical fiber signal input to be converted into 4 independent DP/DVI/XVI  signal outputs. The transmitter supports 4-CH DP/DVI/XVI  signal input, which is converted into 1-CH optical fiber output. The device adopts a detachable SFP optical module, single-mode single-fiber design, the standard transmission distance is 10KM, and the corresponding modules of different distances can be replaced arbitrarily according to different application scenarios. The frequency of theDP/DVI/XVI  input signal of the device is automatically adapted, and the 3G/HD/SD signal is automatically detected, which can be applied to professional DP/DVI/XVI  video signals such as HDTV/FHDTV/HDTV/SDTV, and is especially suitable for long-distance optical fibers of broadcast-level high-definition digital signals transmission and application.


Receiver:

◆1 optical fiber signal input

◆4 DP/DVI/XVI  signal output

◆Universal FC optical fiber interface

◆Output resolution supports frequency conversion

◆Support TYPE C upgrade

Transmitter:

◆4 DP/DVI/XVI  signal input

◆1 optical fiber signal output

◆Universal FC optical fiber interface

◆Input resolution adaptive

◆Support TYPE C upgrade

BIDI 12G SDI Fiber Optic-Bidirectional 12G SDI |Bidirectional Balanced Audio

HDMI SDI DVI 高清切换台

The professional-grade SDI bidirectional optical transceiver is an optical signal transmission system designed based on broadcast-grade SDI signals. The input SDI signal is self-adaptive, and the output can be 2160/1080P60/30, etc. The equipment has built-in signal equalization, serial clock recovery and line driver. Devices are used in pairs. Support 1-CH SDI signal input, 2-CH independent SDI signal output, 1-CH SDI loop out through optical signal equipment. The equipment adopts wavelength division multiplexing technology, single-mode and single-fiber design, and the standard transmission distance is 10KM. According to different application scenarios, corresponding modules with different distances can be replaced arbitrarily. The frequency of the SDI input signal of the device is automatically adapted, and it can automatically detect 12G/6G/3G/HD/SD/SDI signals, which can be applied to professional SDI video signals such as UHDTV/FHDTV/HDTV/SDTV, especially for long-distance broadcast-level high-definition digital signals Optical fiber transmission and applications.


 

 

◆1-CH Fiber signal input

◆1-CH SDI signal input

◆1-CH SDI signal loop out

◆2-CH SDI signal output

◆Universal FC optical fiber interface

◆Support TYPE C upgrade

◆Self-adapted 12G and below

◇ Special functions can be customized

    

DeviceWell·12G SDI Splitter 1 IN 3 OUT PD2011M

HDMI SDI DVI 高清切换台

DeviceWell 12G SDI signal distributor, based on 4K broadcast 12G SDI signal design. The device supports up to single-link 12G SDI signals and is backward compatible with 6G SDI, 3G SDI, HD SDI and SD SDI. The device has built-in SDI signal equalization, decoder, serial clock recovery and line driver, which can realize 1 channel SDI signal input and distribute 3 channel SDI signal outputs. The transmission distance of 12G SDI exceeds 75M,the transmission distance of 6G SDI exceeds 100M,and the transmission distance of 3G SDI exceeds 120M.The device adapts the bit rate of 12G,6G,3G,1.5G and 270M without additional settings. It can be applied to professional SDI video signals such as UHDTV/FHDTV/HDTV/SDTV, especially for broadcast-grade ultra-high definition digital signals.

The device adopts dual power supply system, supports standard 5-12V wide voltage power supply, and supports Type C power supply. It can b applied to USB mobile device power supply systems such as charging treasure.


 

◆ 1x12G/6G/3G/1.5G SDI signal input

◆ 3 x 12G/6G/3G/1.5G SDI signal output

◆ Built-in professional equalizer

◆ Built-in clock recovery, Built-in line driver

◆ Support ASI signal

◆ Input and Output Resolution Adaptation

◆ 3 Colors LED Lamp Status Indicator

◆ Dual power supply system

◆ 1/4 hole screw fixing